tone  
Tone cap mod for volume knob on guitar:
What is this exactly and where can I get it online?
Is it easy to install? just capacitor? Any diagrams anywhere that show the specs and/or installati...
... the string and the top (soundboard). Plus, with an acoustic, changing saddle material will change the tone, but since tone is subjective it may not change it for the better.
As for an electric, I...
Looking for information on the differences in tone and pickups of strats through the years mostly 50's and 70's. Thanks
This brings up a pretty good point. Does everybody have their instruments' and gear serial numbers recorded somewhere?
I never use my tone knob on my MIM strat for the mid PU and always find myself needing it on the bridge PU instead. As i'm installing some new pups (which come with new volume and tone pots so i...
One of my Strats is a double humbucker model with Seymour Duncan pickups. I'd like to change the pickguard from the one that's on the axe (white pearloid) to something else. I've invest...
there is unusual sound being hear when i switch quickly from clean tone to clean+delay..is it normal?...or my korg ax1500g has already its defect?..how can i fix this?..anyone plz help..tnx
...e neck pu mod soon (push/pull switch) to have the neck/bridge sound and all three. I'm replacing a tone pot with the switch. After this there's one extra tone pot left and I'm just not ...
How Major scales are formed Firstly, here is the Musical Alphabet. A B C D E F G A
1 Tone = 2 frets. 1/2 Tone (semi-tone) =1 fret. The formula for a Major scale is Tone-Tone-Semi-Tone- T...
...ombination. Ideally this would be a circuit that would:
a) replace the three existing pots (volume, tone, tone) with an independent volume control for each pickup, b) do away with the tone control...
... is what is known as the Musical alphabet (Musical Notes) with the degree's between them
**
A 1ToneB1/2 Tone C 1ToneD1ToneE 1/2 ToneF1ToneG1ToneA
1 Tone = 2 frets 1/2 Tone = 1 Fret Flat is...
...d and thought, hey its a simple device, and some swear by it... So I got it and within minutes found my tone. Its the best thing I ever put in front of the
Mesa. I use it for my crazy smooth long ton...
... their pots are enclosed in foil and if they are, remove the foil. I can get the original guitar's tone by turning the tone control down to about 7 but with the tone control up, the guitar has th...
Hi
I can't afford to by the above, but have the tone I am looking for, and would love recommendations of amps with the same kind of tone, if you have them.
Thanks
What I am looking for is a good clean tone and a good heavy distortion tone but the more i turn those knobs the more everything goes out of whack, does anyone have a good setting
hi, any tips on this? Looking for suggestions for optimum setting for dynamic range as well as tone- the best starting point for pup height adjustment.
aka: Finding the "sweet spot" -~ on ...
...rrect, they do not have true bypass but buffered bypass. But they sound quite good, almost no change in tone if you send a standard guitar level signal through one, you get about the same thing out. I...
...Mesa Rectoverb during band practice and something was wrong with the sound. I tried to get a good clean tone out of the amp on the clean channel(Not pushed) and all i was getting out of the amp was an...
I'm curious to know what you guys think....do you hear "that" much fifference in tone between the two? Many people consider basses with maple fingerboards to be "brighter" and...
...ickups and some pretty sophisticated active electronics. Very versatile. Crystal clear sound, and great tone-shaping ability. You can go from a great Jazz tone to vintage midrangey honkin' P-Bass...
...tch (and wire in true bypass while you are at it) you would have one killer pedal.
And speaking of tone sucking - I have a half dozen DOD pedals from that era, and none of them seem to suck tone...
Hi
I love the Rickenbacker tone and am considering buying it as my next guitar. I haven't been able to find one to try, but hear that they have narrow necks, and I like mine wide. So I was wonde...
...
Lets start then with the musical alphabet which is:
A B C D E F G A
From A to B is 1 tone = 2 frets from B to C is 1/2 tone= 1 fret C to D is 1 tone =2 frets
D to E is 1 to...
<snip>
Compressed distortion = more touch-response in the resulting tone (as your distortion is "seeing" the naked guitar signal), but the possibility of hiss during quiet playing. ...
...upposedly). Maybe they got it backwards on their site?!? I bought a yellow one and didn't like the tone at all. The quack was there but the tone had a weird envelope to it in the "non-quack&...
...ones designed to mimic a tube amp fall way short, IMHO.
If you plan to use SS, do not rely on it for tone, and use as many watts as you can for headroom. Rely on an effects unit or tube preamp for...
....as loud as you can stand it? (Heh damn they're LOUD amps!) This would be "overdriven" tone (as opposed to distortion tone) right? How does it compare with an OD pedal?...
The Content on this site is provided for general information purposes only. Your use of the Content, or any part thereof, is made solely at Your own risk and responsibility. By entering this site you declare you read and agreed to its Terms, Rules & Privacy.
Copyright © 2006 - 2010 Axe Central |
TIP: Write your question in details [ why? ]
Sponsored LinksLatest Posts
|
more posts...