...at for some SD hotrails.
The hotrails are the four conductor wiring type.
My question is, how will the sound be affected if I wire my pickups in series/parallel? What does changing this accomplish?...
...anjo with the neck of a guitar. It is tuned like a guitar and can be played by guitarists who desire the sound of a banjo. It was popular in the jazz and swing music of the 1920s.
Guitjo (double-nec...
Does the noise sound a smooth hum, or a staticy (sp) hum? Does it increase/decrease when you take your hands off the strings?
yep they f**k up, get scratchy, still hear sound at 0 and don't change the pitch /tone at all.
leads are fun too - ever picked up AM radio on a bad lead ?
...e up. I can only turn it so much then it just stops. At the same time this happened a mysterious shaking sound began to come out of my headstock. Is there a possibility the two are related, or any sug...
...music store or with a live band playing, it is virtually no worse than the 60 cycle hum.
I like the sound of the Vibrolux. If these modifications that were describe work, then I would buy one in...
...I mean in the way of how he would have written it if played on a guitar? (sometimes it just doesn't sound the same when exactly copying the chords from one instrument to the other)....
Glad to hear they sound great. I'm gonna build a hardwood cabinet for it.
I think I got a pretty good deal. $105 on ebay and it was tuned up and modded by Torres Engineering for added gain.
...t satisfied with them I advise you to sell them indeed. Only when you're perfectly satisfied with a sound are you capable of doing your best at playing ...
...t comes with an analog delay...I`d have to say that I think the Memory Man Deluxe gives me the closest sound to a tape delay unit. Plus, isn`t it about $100USD cheaper than the Maxon as well? I k...
Mine says RC3403ADB
are there other pedals from that era that use these chips?
It does sound better than 4558-based pedals I've played.
... for a 800 2205 marshall? is not listed on thir site!!!? how you describe this what are the benefits on sound?...
there is unusual sound being hear when i switch quickly from clean tone to clean+delay..is it normal?...or my korg ax1500g has already its defect?..how can i fix this?..anyone plz help..tnx
...ing to accomplish and there are no rules. After the Distortion/Overdrive is great for really shaping the sound of hard rock and metal sounds or as a boost for solos and/or preventing feedback. EQ befo...
...ssibility ref the vol difference at times Pu's can get wired out of phase and produce a really thin sound...(This means the positive and the Ground are reveresed.)
Fenderphil...
...basses have bad, little or no shielding for their electronics which gives them their "hissing" sound. The better the bass, the better the electronics are shielded, in most cases....
My favorite parts are your short decriptions of the pedals; history, sound, application, etc.
I was surprised at how many Boss pedals I've owned through the years.
-dave www.themoodrings.c...
Hi
I am really fed up with cables that sound bad and last 2 seconds flat - So - please recommend good long lasting cables!!!
thanks
...s have gone unanswered.... That's why I have called upon the axecentral members expertise.... Any sound experts out there???? See my question below....
Thanks,
kcbuck
P.S. That boy will be ...
...recently aquired the above model, great body, neck angle seems good, f/b a bit rough perhaps, p/u's sound great on tape. Anyone got any useful suggestions for improving this instrument?...
...--that`s what I`ve done and I don`t get a volume drop, but individual units may vary; I didn`t like the sound quality of the effectron II, but I do like the I and the III have fun cg...
...wound because the b-string sits too high otherwise. I'd like stainless since I don't like the sound I'm getting from anything nickel. All I can seem to find are either flat, or stainl...
...
I got this pedal, and found the the instructions were kind of vague.... I can't seem to get it to sound right - Would really appreciate some clear instructions. Thanks...
...t from the standard danelectro strings but don't want to waste money trying to find a certian "sound". any tips?...
Hi Frank, Here is some info that may help....
You might want to try recording using both a direct box and a mic. Then mix the two until you find what you're looking for. The bass amp should b...
...ut trying it first (for $250) which I understand is a great price, but I would like to know what kind of sound it has, how it feels and so on. thanks....
... resonate together as a whole. The result is added volume and instruments that are easier to play with a sound that is more full and balanced. Not only will your instrument sound better but the notes ...
...Delay-NS ->Amp
Never forget the amp! Also, I'd change things around if I didn't like the sound. Nothing is cast in stone....
...t ago again, but my amp won't cooperate - it turns on, but when I connect the guitar, absolutely no sound comes out. Can anyone advise me on what the problem might be?...
...board, two humbucking Peavey solid body guitar for a few years. It was a good guitar and had a very nice sound. It reminded me of a Telecaster with two humbucking pickups. But it was heavy....
The Content on this site is provided for general information purposes only. Your use of the Content, or any part thereof, is made solely at Your own risk and responsibility. By entering this site you declare you read and agreed to its
Terms, Rules & Privacy.
Copyright © 2006 - 2010 Axe Central