problem
... I think flourescent lighting causes it as well if u're near it.
The 5 way switch gives me the hum problem at times. Don't know any better way of cleaning it except by moving it up/down ...
I had that problem with my DS-1 so I replaced the LED and now all is fine. young...
...e glitches than hitting a string and nothing coming out of the thing. i mean, actually it's not a big problem, but i'd like to have a bluebox w/o gate. just because i want it. the other nigh...
...aster that was upgraded with Seymour Duncan pickups and graphite bridge saddles, but otherwise is stock. A problem I have always had with this guitar is that it sounds great on the upper frets, but th...
Thanks for the offer Neal, but the only problem would be I haven`t owned a car in 14 years, since moving to Manhattan.
Fingers I would first try out if a 15 Watt amp would solve that 'problem'.
...039; about the comparison. Good to know I think your photo is too large, Rodney. That's usually the problem when not succeeding in uploading. Is it under 500 pixels?...
Thanks for the advice, I have the same problem. I hope it will work.
...rets with a small triangular file with the corners ground smooth. It takes longer and consistancy can be a problem but it's quite do-able....
My leccy guitar has a problem
When I turn the volume on one of the pickups up to top it cuts out or crackles until I fiddle with the knob
I remeber hearing solutions to this without rewiring, is...
... Tube for his advice. Apparently it can be modified to a series loop which is good. I have found another problem though. Firstly, whenever I change from clean to an OD channel, there is a noticible...
Hello Zenosparadox, welcome to the forum
This is a complex problem.... I wish I'd know what to respond to it, but I honestly don't since I have never encountered this before
Le...
...;ve googled this issue with no results. Everything I find has to do with relief, bow, or twist. Here is my problem: I have a bass guitar that has a neck that bends towards the ceiling. Again, I'm...
Hi
I have problem neighbors who I risk annoying if I play with my amp on louder than 5 I was wondering if playing quietly would all the time would damage my amp?
Yeah. The other guitarist in my band uses an ESP viper. I`ve noticed that it doesn`t have that problem.
Dear Steve, I got the same problem, The R means that it is a guitar made in Japan 2004-2005
Surely someone must be in the know about this. I can't believe how much of a problem this seems to be...not even Marshall has seen fit to answer my email in regards to this question.
... Peavey ValveKing 212 100 Watt amp. When he turns it on it buzzzes awful, not useable. He has always had problems with it too. Anyone out there have a clue as to what the problem may be? Help me h...
...ive than what its worth in turkey).it's very very old and the frets are melted. that makes a very big problem.except that the sound is very good.
i guess it's from 80's or maybe late 7...
Dear Guest:
I am a big fan of BOSS pedals.... However, I had the same problem with the MD-2 ($80.00 USD) and finally took it back to Guitar Center for a refund with my son and we tried out all of th...
I was wondering where my black fender guitar with floyd rose bridge came from and if there would be a problem of tuning without the metal nut.
Serial Number: E907933
...his can cause electrical interference....
3. Any other electrical devices recently (since you noticed the problem) installed in the same curcuit that are operating at the same time?
4. When the amp ...
THE DE410 can handle 6string Smith with nooo problem, I know because thats what I use. It beats out Harke, Swr and Ampeg!!
... whatever.
Of course they could also be poor quality strings. A new set may put matters right Another problem at times is the wire twist at the ferrule end can creep, this can be avoided by tinin...
...r MIM strat standard body in mint condition. I am going to buy a maple MIM neck for it. Do you foresee any problem's as far as a fit?...
I think I might have found a similar diagram on GM Arts website,but I will probably have a problem knowing what toggle switch to use.
The reverb has stopped working on my YGM3 Guitarmate.
When the reverb knob is turned up the problem disappears. any Ideas what could be wrong?
...y a professional on Friday evening. It cost me 12
Euros and was worth every cent because he discovered a problem with the truss rod nut. He found out that the nut on the truss rod is nearly 'ro...
The Content on this site is provided for general information purposes only. Your use of the Content, or any part thereof, is made solely at Your own risk and responsibility. By entering this site you declare you read and agreed to its Terms, Rules & Privacy.
Copyright © 2006 - 2010 Axe Central |
TIP: Write your question in details [ why? ]
Sponsored LinksLatest Posts
|
more posts...