My ProfileKeep Up to Date:
 Blog  Forum |
problem
...st (at least the bitching about their MySpace page - Do not go to their page with Firefox - use IE and all problems will be solved - although this is a bit surprising since I have never run into this ...
...n volume and expression pedals (two seperate). Any one have any ideas on how to get started? The biggste problem seem to be, after doing a litlle research, to find a propper housing. The pots, jack...
...his maybe bazar question, but its been doggin me since I picked up a guitar 2 months ago. I've been having problems playing clean chords because of my large fingers.
Its hard to get my fingers on one ...
...as the NPN silicon version.
I was also attracted to this design because it sounds like there were thermal problems with the PNP germanium transistors. The characterization of the NPN silicon version ...
...by a professional on Friday evening. It cost me 12
Euros and was worth every cent because he discovered a problem with the truss rod nut. He found out that the nut on the truss rod is nearly 'round' ...
...erent guitars for different styles, but when I have to pull out my Ibanez for the rick stuff I have a real problem getting used to the ultra thin wizard neck, I love the sound of the guitar but switch...
Can I use one of them Boss daisy chains with my Voodoo Lab Pedal Power?
Potential problems? I have more than seven gadgets on my board and I don't have the cash to invest in another power supply.
...he string height is increasing over time.
I wonder if adding a shim at the neck/body joint could fix this problem. Where do I place it? At the bridge side of the body pocket or the nut side? Any go...
...tes,
I can't complain at all. Can do all my "fancy" double thump, sweeps, double triple slap, etc. with no problem.
Tonal flexibility: Excellent
Dynamics/Punch: Amazing
Truss rod: Nice and lubed, not ...
...ation
I can find is that series sound.
Now for the noise issues, I really don't think that there will be a problem as series wiring will double the noise and the output - similar s/n you see and the b...
...But, it has a thin neck, low action and I can play it (I have some carpel tunnel in my left wrist and have problems with a thick neck and/or high action).
I'm getting some string buzz on a few of the...
...fingering is somewhat clunky on some chords and the result is buzzing. Thumbing the low e string is also a problem sometimes....
...
Anyway, many of the user reviews I've been reading for the lower cost basses mention fret buzz as being a problem. At first I just figured these were inexperienced players who didn't know anything ab...
...pin 7.
Of the last two clones I repaired, the first had a faulty SAD1024. I got one
for 17.00. The problem was basically easy to track down. Everything (circuit-wise) seemed to be in-check,...
... all over there use?
And how many hours weeks willi t cost to master it.
With the F shape ba i do nothave problems....
I have a 1996 Les Paul Classic Plus,and the original adjustable bridge is a problem...Now, for a guitar this nice and kinda expensive the adjustable saddle bridge is really junky!
It has alot of f
...ations nationwide? I'm just looking to replace my 20 year old guitar that is starting to show some bridge problems. I was looking at low priced guitars that still had a solid top on them. I looked...
...arallel with the 4.7ufd cap to get a bit more bottom end. I'd like to go up to 10ufd but again, size was a problem...After these changes the pedal really seemed to come alive
As soon as my 3pdt switc...
I'm trying to solve a problem of my PM-120 being very dark sounding.
This doesn't make sense to me on a guitar with so much maple and an ebony fingerboard. By contrast, the Gibson 175, which is very s
...d SG have a set neck. Which (so I`m told) is better (for sustain and ease of use). (Is that true...?)
Problem is... I cannot find any GOOD info about this guitar. Using Google with the search te...
...g for whatever will give me the least noise and a nice clean sound.
Also assuming there might be some cap problems, but will deal with that once I get the thing at least functional.
Thanks!
...Brad...
I have a new Mexican Jazz Bass that I think might have an electrical problem. I've had it for less than two weeks and all of a sudden unless both pickup volume dials are at max, there's a loud hum.
...nknown great bargain amp, or are they mostly unknown because they're junk? Do they have any dependability problems? Are the pots and tube sockets mounted on the chassis, or on a PCB?
Any kinds of w...
...eissue mentioned a drop in signal volume when the effect is engaged.
To date I have only observed this problem in units equipped for true bypass. Some of these units use a 3PDT footswitch with a...
...tch is turning on or off reverb, but i suspect that i'm turning off the reverb circuit which may
what the problem would be? If so, can it be fixed by me and not taken to an authorized repair center. ...
I run my guitar through a homemade Fuzz Face and a Vox V847 Wah pedal, but i've got a problem with this. the only way I can get it to "work" is by using:
guitar-->fuzz-->wah-->amp
i'm sure the w
I'm an italian boy, so, excuse me for my english.
Yesterday I brought an Ibanez RG 370B Jewel Blue, it is my 1st electric guitar. I tried to change the intonation of the strings and I broken it.
So I
...spade headstock+ if not 2 absured either spades or skulls as machine heads -body ill be ok with,neck ios a problem as my woodworkin often resembles my cooking!!!!
anyway ello 2 you all+let me have an...
My leccy guitar has a problem
When I turn the volume on one of the pickups up to top it cuts out or crackles until I fiddle with the knob
I remeber hearing solutions to this without rewiring, is it
... to be mono, tip and ring are connected together. Simply pulling the jack out a bit solved this one.
That problem solved, my dear wife started complaining about how loud it was sounding - a look at t...
...ged that.
I've been studying jazz for a number of months now, on my own, and I'd love to have an archtop. Problem is, the archtops I've played that I could afford (stuff like Carlo Robelli) are not v...
... pickups. I know the LP is alot heavier, the SG is thinner, lighter (which I like) but I heard there were problems with the SG`s neck joint??? Made it fly out of tune pretty easily or something like...
...end I have to loosen the truss rod (turn counter-clockwise)?
I can give the guitar to a luthier to fix the problem but I would rather like to try it on my own first (-:...
...hind. Arrg! I need someone to reassure me that this is typical for new lead guitar players, and that the problem goes away if you practice enough.
Man, have I ever gained a new appreciation for lea...
I like to buy a Fender Strat, made in Mexico. It was build in '96 and is in mint condition.
My Problem is: I do not know much about the older mexican made Strats.
Can someone tell me Pro's and Con's?
|
Latest Hot PhotosLatest Posts
|
Copyright © 2006 - Jan 2009 Axe Central