| Blogs | Forums | Photo Album |
pedals
Hi
I was wondering if anyone could tell me where I could by used guitar pedals? - on ebay they are pretty much the same price as new ones, and at pawn shops as well...
Any Ideas?
...been playing guitar for a couple of years, but I still can't figure out what the point of distortion pedals are. It seems like the options for amps' gains are so overwhelming, why would you...
Hello,
I just purchased the Furman SPB-8 today and plugged it in to all of my pedals and they won't work. I've got a bunch of boss pedals and a digitech whammy. The digitech is working f...
...I`ve been gigging with a solid state FullDrive 2 overdrive pedal and some tube-based ToneBone distortion pedals. I also use a Gibson SG and a Reverend Hellhound amp. I use the ToneBones as my main ...
I have been powering all of the pedals in my pedal board with a very compact 1500 mA "travel" adaptor from Radio Shack for years... Once in a while the good folks at R.S. make a good produ...
I have the following Boss pedals:
Flanger BF-2; Metal Zone MT-2; Chromatic Tuner TU-2; Chorus Ensemble
CE-5; and Noise Suppresor NS-2. I also have the Dunlop Crybaby 535Q.
Can someone please t...
Hi
My effect pedals at the moment are a crybaby wah, Maxon OD820, dd-3 dewlay and BF-2 Flanger.This is the current order but I am getting a weird signal from my delay. should I connect them different...
...there all you mighty guitar players, I need your input on the best setup for the following list of guitar pedals. I have:
1. Boss Tuner (TU-2)
2. Boss Compression Sustainer (CS-3)
3. Boss Super C...
try replacing the LED
I`m sure the LED circuit is probably the same for any of the Boss pedals. Check at www.geofex.com
Where can I find these? Supposedly Mouser has them but when I search on it, I get: 526-NTE123A NTE123A
Is that a functional equivalent?
...ut it's by far the most useful and best sounding digital delay I've ever heard. I gig with both pedals live every week. They sound great and both are built like tanks. I'm between compr...
EQ pedals can be used anywhere in the signal chain, it depends on what you are trying to accomplish and there are no rules. After the Distortion/Overdrive is great for really shaping the sound of hard...
I have a Laney tube amp that has awesome bluesy sounds. Clean is sweet. Now for some grunt. Which pedals can get me there without sounding fuzzy. Over-drive pedals seem fuzzy at high gain, and can los...
Having aquired a few effects pedals over the last few months I thought I might have a go at building a pedal board. I`ve only ever really used my pedals in isolation so arrangement is something new ...
Both companies offer mods for the Boss DS-1 (distortion) and TR-2
Tremelo pedals.
Opinions? Anyone? I have both pedals and am pretty underwhelmed with both - the TR-2 in particular. TIA
Make sure to give it a elevated second row type thing for the back pedals. After really packing the pedals onto the self-made board I have now, I find it`s a real bitch to try quickly hitting the b...
Mine says RC3403ADB
are there other pedals from that era that use these chips?
It does sound better than 4558-based pedals I've played.
My favorite parts are your short decriptions of the pedals; history, sound, application, etc.
I was surprised at how many Boss pedals I've owned through the years.
-dave www.themoodrings.c...
...u are at it) you would have one killer pedal.
And speaking of tone sucking - I have a half dozen DOD pedals from that era, and none of them seem to suck tone. I run 7 DOD pedals in series, and t...
I noticed a few of you guys who read and post here own Digitech RP50 pedals. What are your opinions on the distortions on this pedal? also if you put a distortion effect in a patch and then clean o...
...go. I messed with it some but it was going to be a pain getting it to stick to all of the bottoms of my pedals and my layout doesn`t change much so I ended up using machine screws that were long en...
is take the power from a power supply (120 volt AC to 9 volt DC), feed the power to a handful of pedals via a chain of connectors called a "daisy chain". The PSM-5 is also a switch that per...
Hi
These are the two tremolo pedals I am looking at - which do you think would be the better buy?
... a tube pedal would be a nice intro. I have made my own guitar, speaker cabinets, and solid-state effects pedals, so why not make a tube pedal?
The reason why I asked about the Blue Tube is that al...
Here is my setup
AMPS:
Mesa Boogie Tremoverb
Roland JC-120
Pedals:
COMP/SUSTAIN
EQ
WAH
EQ
WHAMMY
WHIRLWIND A/B
DISTORTION
DISTORTION
PHASER
DELAY
FLANGER
PHASE SHIFTER
TAPE DELAY...
...when i compared them with the verb in the ampeg reverberocket i'm using at the moment, i thought the pedals sounded duller, less bright than the reverb in the ampeg. seemed like there was less ...
before 1990, was originally made in Japan and is now made in Taiwan. Boss has never made pedals in Korea, although there are definitely some Korean knock-offs of Boss pedals.
As for sound diffe...
I was told that these two pedals used the same circuit, I looked at some schematics I found online and all though some component values are different, they look very similar.
Can anybody tell me what...
The Content on this site is provided for general information purposes only. It can not and should not be a substitute for face-to-face professional advice. By entering this site you declare you read and agreed to its Terms, Rules & Privacy.
Copyright © 2006 - 2009 Axe Central |
Sponsored LinksLatest Posts
|
more posts...