pedal
Hi
I was wondering if I can change a boss adapter from a negative tip to positive?
I got a Cry Baby Wah wah pedal for Christmas but am not sure if I should use a guitar cable or a speaker cable to connect it?
Is it worth getting it fixed or should I just let bygones be bygones and fork out the money on a new od?
Got one for ya'll:
Where should an equalizer pedal be strung om a pedal board before or after the distorsion pedal? A buudy bough a BOSS GE-7 and has it after the distorsion pedal and I suggest...
I have recently bought an AW-3 Dynamic Wah pedal and im very pleased with it but it eats batteries! I am making a power supply for it but the only thing i dont know is what type of connector the ped...
I'm looking to get a delay/replay pedal for my boyfriend's birthday but don't really know what to look for, this is somewhat of a surprise present as i've only heard him mention th...
Guest:
Have you tried swapping out the 2 cables between the guitar and the pedal and the pedal and the amp? Also, have you checked both cables to ensure that they are good and have conductivity betw...
is take the power from a power supply (120 volt AC to 9 volt DC), feed the power to a handful of pedals via a chain of connectors called a "daisy chain". The PSM-5 is also a switch that per...
...Quadraverb to achieve this sound. I was wondering if anyone has tried getting this sound using a reverp pedal or a
Reverb into delay pedal combination. If so, what were the results? I would like t...
...een playing guitar for a couple of years, but I still can't figure out what the point of distortion pedals are. It seems like the options for amps' gains are so overwhelming, why would you ...
Hey you!
I would like to build a bass octave pedal, but I can't find any schematics on any octave pedal designed for the bass. In my opinion the EBS octabass is the nicest one of them.
If a...
...ser PH-2
Problem: LED doesn`t indicate On/Off status (as if it were broken) but apart from that the pedal seems to work properly
Does anyone have a link to a site where I can get some tech inf...
I've got one of those pedals.
I brought it to a gig and was tapping my foot on it to give handclaps on 2 & 4.
Everyone in the band started screaming at me and the pedal is now sitting i...
Dear Guest:
I'm not sure what your question is.... I think your asking if you can use a reverb pedal in the pedal loop with a 1965 Super Reverb Amp.... If this is the question - the answer is ...
...Picture wah which is amazing and wonderful but I was trying to put together a relatively inexpensive wah pedal for my wife. I bought a cheap,broken Dunlop GCB-95 wah and installed the Roger Mayer pot ...
Dear Guest:
I take it you mean "How do I run my Boss pedals to my triple rectifier"?
Route the pedals the way you would normally to your amp.... Generally, I like the wah pedal to be wh...
I noticed a few of you guys who read and post here own Digitech RP50 pedals. What are your opinions on the distortions on this pedal? also if you put a distortion effect in a patch and then clean o...
Far and away the greatest fuzz pedal is the Boss Hyper Fuzz FZ-2. Don`t bother with the FZ-3, even though it`s a solid pedal with a simple interface, it doesn`t have the range you get with the FZ-2....
Its not true bypass, but it sounds fine in-line since it has a nice buffered output, plus its a *killer* pedal to have at your feet...mine has worked fine for years.
I hear a slight difference betw...
... But you`re right- it`s not the world`s greatest overdrive. I still haven`t gotten around to trying a pedal in front of it, but I`m sure my Tube Works pedal will do fine. With my band, I play clea...
...amaha UD Stomp for delay.
The Frantone is pricey for a tremolo buy it's about as thick and chewy a pedal as you'll find. The UD Stomp is not as widely used as the line 6 pedal but it's...
Can anyone give me some advice on using a pedal for bypass and the "other" two items that it has controls over via that back...
I just picked this up recently and tried out a couple "...
What is the best sounding analog delay pedal out there (in production today). I`ve heard about the EH Deluxe Memory Man, the Maxon Vintage Series Ad-900, but thats about it. Is there really not anyt...
...nes I may need to cut through.
Yesterday I discovered that ToneBone now has a user manual for their pedals. I downloaded it and tried the sample settings. Some of their samples had the pedal set...
...o the problem of losing highs when turning down the volume. I think one was to use some kind of preamp pedal (I think I saw that on some webpage for Tuck and Patty). I also think using a wireless t...
The EM5 is now my favourite pedal
...mer tones. If you would really like to hear some wonderful vibratone/psuedo fast leslie from a chorus pedal I`m all about the ibanez BC-9 bimode chorus and DOD phasor 201. I use the second outpu...
I have a nano clone chorus pedal. any good mods out there for it?
i've gotten radio stations. i tune them in with my wah pedal.
The Content on this site is provided for general information purposes only. Your use of the Content, or any part thereof, is made solely at Your own risk and responsibility. By entering this site you declare you read and agreed to its Terms, Rules & Privacy.
Copyright © 2006 - 2010 Axe Central |
TIP: Write your question in details [ why? ]
Sponsored LinksLatest Posts
|
more posts...