neck
...nd a 2008 American Standard Telecaster and they all feel the same to me as far as playability goes i.e. neck, fretboard, and fret locations on the neck.
The difference is in the materials and hardw...
... direct me to an internet site or two where I can learn how to *properly* set up a bass guitar: bridge, neck, string height. I want quite low action.
Thanks for any advice....
well the neck can be sold on ebay for about 50 dollars...
can you have both types on one guitar? say an emg at the bridge and a p90 at the neck?
just curious. never seen it, so i'm assuming it can't be done.
What modes would you make on the mim? I have one with a maple neck.
What would be the most important modification to make first?
...he serial number is so low? In person it looks far better than online. It has extremely birdseyed maple neck, deep flames, that show through the side binding (how'd they do that), exceptional nec...
...w machine. They are working out great. Thank for the help. Rightnow I'm working on intonation. The neck looks straight and after tightening up the bridge tention there is no fret ringing....
...asically a clone of the PRS hollowbody. This is a Mahogany body with arched flame maple top, maple set neck.
The pickups have rather odd looking gold covers on them, but sound really good. The n...
Look in the sound hole on the bottom of the neck joint! My new
Dw-7 is located there.
Rick--
"Always do Right - This will Gratify Some and Astonish the Rest"
Mark Twain
... alternatives, such as the aforementioned EMG's as well as Fender noiseless singles. I replaced my neck and mid single coils in a '95 Fat Strat with single coils from a Super Strat. The tone...
...
Model Number: 026-1900-(Color#)
Series: Special Edition Series
Body: Basswood, Carved Top
Neck: Maple, Set Neck, Modern “C” Shape,
(Polyurethane Finish)
Fingerboard: Rosewoo...
You might have some backbow in the neck, in which case heavy strings, and a fairly humid environment for a few months might be in order.
has anyone tried to install an lsr roller nut on a strat neck with a floyd nut shelf
I am trying to find somebody that makes or has Rickenbacker 4001 style bass body/neck blanks...as I want to add my own hardware and pickups to it..I dont want any pickup holes dug out....as i am plann...
Hi
I am thinking about changing the middle and neck Pickups on my stat to the GFS faux Texas specials. Do you think I will regret it?
... surely, someone can help me out here.
My IBZ has a P Quarter pounder pickup that I really like in the neck (where else...)
I'm looking for a good substitute for the sh1tty Jazz IBZ USA made by...
Here is the response I received from the guitar forums at Next Level Guitar:
What you have is a Set neck Made in the USA in 1992(N nineties+2) Custom shop guitar. Ash Body, highly figured book-matc...
I have a USA Fender Strat, Serial number N8330661. Black body, maple neck, condition is 7 out of 10. Aproximately what is the value of this guitar? thanks for your input.
84 standard telecaster-- rosewood neck--tortoise shell pickguard--round straplocks--- everything else original... what is its approx value.. its in nice condition...
James wrote:
I have a custom shop strat,the g-string sounds the pitts,only when using the neck pick up at 4-10 on the dial tone at the 12 fret is worst at 0-2 dial tone it is ok all other pick ups...
...rapy on it, though the fifth string ones below the fifth fret sound better then ones played towards the neck on the sixth string....
Hi everyone. I've started a guitar project, made the body from scratch, got a cheap neck pre-made, but I need some parts. Does anyone know where I can get low prices (20-50$$) but still good qual...
only thing wrong with it is that it`s a pain in the ass to adjust the neck because of the truss rod access, which it through the back. You need gangly arms to get at that bitch...
...c or acoustic? In any event keep your thumb straight up and the first joint centered on the back of the neck.
If this doesn't work, take up golf. Then you'll know about real anguish ;-}...
Is there a strat with two humbuckers
Gibson covered type Ser#MN5161243?
It has a strat neck but I'm wondering if the body was an add on
...
I have black American Strat Plus. Great guitar.
Only work done on it was changing the roll nut on the neck....
...the mistake of leveling them even more with a sanding block. The frets are pretty worn, and I want the neck re-radiused anyway, so I'll be refretting it, but I don't have all the materials ...
i have a deep green fender stratocaster,with a white pick guard a wammie bar,a maple neck,serial # E 404027. how do i find out what year it is, and what it is worth?
i'm having a strat custom made for me, i still have to decide on the frets, the style of the neck will be fat-back.
i want the guitar to feel like a fender. what would be the best choice for the...
Hi, have a recently aquired the above model, great body, neck angle seems good, f/b a bit rough perhaps, p/u's sound great on tape. Anyone got any useful suggestions for improving this instrument...
The Content on this site is provided for general information purposes only. Your use of the Content, or any part thereof, is made solely at Your own risk and responsibility. By entering this site you declare you read and agreed to its Terms, Rules & Privacy.
Copyright © 2006 - 2010 Axe Central |
TIP: Write your question in details [ why? ]
Sponsored LinksLatest Posts
|
more posts...