| Blogs | Forums | Photo Album |
neck
I want to replace the neck on a 1986 Standard Strat. It has the 4 bolt neck.
Should any 4 bolt neck fit? Or are there certain one's that I should look for?
Neck through and set neck designs are known for better sustain than the bolt ons, and this is, for the most part, true. (For the sake of simplicity, I'll incorporate set necks as part of the nec...
What is the difference between a set neck and a bolt on?
I was under the impression that Tele necks and Strat necks are more or less interchangable yes? no?
I've got a cheap Squire Strat in need of a replcement neck and I'm trying to figure out...
...hts on the micro tilt adjustment on the Fender Strat. Mine has one. I am thinking of just shimming the neck as the tilt set screw keeps backing out causing the neck to go out of adjustment. Has any...
...ass with the pickups and bridge facing you (holding it by the horns), there is a seperation between the neck and the body on the left side where the neck and body meet. It looks like the saw ran away ...
Hi guys,
How you all doing? First timer here...
I've replaced the stock neck on a Standard strat with a new one bought from AZGuitarParts. When installed the main problem at first was the allig...
...ve to pull out my Ibanez for the rick stuff I have a real problem getting used to the ultra thin wizard neck, I love the sound of the guitar but switching from other thicker necks to this thin one is ...
...coustic guitar. Its probably 30 yrs old and has been stored with the strings tight. This has warped the neck slightly raising the strings off the frets to make it somewhat difficult to play.
Can I...
...ly (for the first time ever??!). But I can't seem to find anything out there that will tell me its neck radius. Can you tell this from its serial no? It has a maple neck with a rosewood fingerboa...
What would be a good amount of neck relief for a Mex Fender J, with a 241 mm (9.5" radius neck. I have seen everything from 0.75mm to 0.3mm (0.012"
being suggested on various websites. I a...
...ation and string height.
As for shimming...
I have a 1965 Fender Malibu acoustic that has a bolt on neck much like that of a telecaster.
I shim the neck to adjust the action.
This is easy to do....
...needed, you could just switch the position on the 5 position switch so that the center pup is where the neck pup normally is and vice versa, that way the 1st 3 positions would be bridge, bridge and ne...
Was wondering what the standard neck width (where it bolts on) is on the
Fender basses, Jazz and Precision through the years, has it changed?
My late seventies schecter P bass and my 1977 Jazz bas...
...ything I find has to do with relief, bow, or twist. Here is my problem: I have a bass guitar that has a neck that bends towards the ceiling. Again, I'm not speaking of neck relief. If you are pla...
I gather it's more expensive to make than a (winging it here) "short tenon neck" and of course sounds better.
 
...:
The 2mm are correct, obviously I mixed something up by converting to imperial units (-:
I had the neck fixed by a professional on Friday evening. It cost me 12
Euros and was worth every cent b...
Here's the question: bying a cheap electric with pale appearance and give it more character with tinting - how to do it? With Brown shoe polish? What's the technic: how to work with the shoe...
Somebody help me!!! I have one of these guitars and can't find any info on it. I'll try to post some pics of it soon. 1966 era, pearl inlays on 1st 3rd 5th all the way just like the Custom. ...
http://memphiscat.com/FEATURES.htm NEW ADDRESS
This is not an MP3 site. These non-archived, streaming audio files are for your listening pleasure only.
The Raveonettes- The Chain Gang of Love ...
I've got a white Squire Strat with the Serial Number 237930 on a chrome "F" neck plate...Nothing stamped on neck...I can't make out markings on neck bracket except for the last num...
I put a replacement neck on my strat copy.
Its a 22 fret neck that replaced a 21 fret neck. The intonation will stay the same, because the old fretboard was flush with the old neck and the repla...
Think about it. Virtually all necks are maple, and on a maple fretboard the fretboard "is" the neck. I`ve never seen a rosewood neck, so on most electrics the rosewood fretboard is mated t...
Anyone know why Fender discontinued these ? I have one and the neck is the best neck I've ever played. The "star" position markers are kind of cool compared to the dots also. Mine is La...
...t style right now Compound radius It feels just as good as my PRS about 5 years no lose frets one nice neck. I have a Vintage
Strat style neck I'm putting on a strat copy for myself. I can just...
There's the nut width/neck 'feel' to consider... (my '73 custom deluxe precision came with a 'jazz' neck from new and I can't get on with the standard precision neck...
Thanks. Probably I will stay just making the body, the neck may be too much by now. Could you recommended a good std jazz neck, Carvin, Allparts, used
Fender neck ? ... Will they fit a body made from...
The Content on this site is provided for general information purposes only. It can not and should not be a substitute for face-to-face professional advice. By entering this site you declare you read and agreed to its Terms, Rules & Privacy.
Copyright © 2006 - 2009 Axe Central |
Sponsored LinksLatest Posts
|
more posts...