... (after REALLY liking `High & Dry` and `On Through the Night` and thinking, "God, what an awful guitar sound". I guess in retrospect, it was 5 years after the first 2 Boston albums, b...
...se my EQ at the end, after i set the EQ volume up 1/4 pass the middle mark, I turn the volume down on my guitar half way, then adjust the amp volume right were I want it. This way I boost the volume...
Hi GJ. Here are the details for your guitar.
Just a point when searching serials make sure you put V Zero etc not VO.......I mean put a zero not an O not write zero as it could read. in other word...
... the complaints I have heard about Fender Customer Service they just rocked for me!
Well, it is a nice guitar, that's for sure, and a low serial number! I just purchased the guitar, so am pret...
Hi Roy H Here is the info relating to your guitar.
Guitar Info
Your guitar was made at the
Fuji-gen Plant (for Fender Japan), Japan
in the Year(s): 1984 - 1987
Fuji String Instrument Prod...
guitar. The sides/wings are hollow.
A the top of a true hollow-body would be held rigid by bracing, like an acoustic guitar.
Some guitars have a block only under the bridge, in order to suppo...
...made (MM/DD/YYYY),
2. Where was it made (City), and
3. Ask for the original specification sheet for the guitar.
Don't forget to send Jeff the serial number or he won't be able to tell y...
I bought dunlop strap locks for my guitar, ended up hating them, the only nice thing about them is the way they attached to the strap, the button that went on the guitar was clumsy and wasn`t as stu...
Hi cRidder, Here is the info re your guitar
Your guitar was made at the
Fullerton Plant (Fender - Pre CBS Era), USA
in the Year(s): 1957
Fender: Fullerton
The Fullerton factory opened ...
...e serial number. Jeff works for the Consumer Relations Dept. at Fender and he will be able to track this guitar and answer your questions. Also ask him for the orginal spec sheet for the guitar too....
Hi RRamsey, Here are the details for your guitar, you will have to shop around as to value...
Guitar Info
Your guitar was made at the
Fuji-gen Plant (for Fender Japan), Japan
in the Year(s):...
Schaller is Schaller. Check these links for hole sizes. http://www.warmoth.com/Guitar/Necks/keyholes.htm
http://www.warmoth.com/Guitar/Hardware/tuning.htm
Yupee:
The serial number indicates that it was made in 2004 - 2005. I think $325.00 for this guitar is in the ballpark as new MIM Strats go for about $500.00.
Send Jeff the serial number and the ...
... Spruce and Classical, Rosewood,Spruce & Cedar) Of course this also has an efect on the weight of the guitar with Flamenco due to construction is much lighter than a Classical guitar and much thin...
Hi There, here are the details of your Ax..
Guitar Info
Your guitar was made at the
Corona Plant (Fender), USA
in the Year(s): 1996 - 1997
Fender: Corona
Corona factory was opened i...
Maybe the guitar was disassembled by someone and reconstructed with a different headstock that was made in the USA but has its original body has a different serial number? Or are the serial number and...
Here are the details of your AX
Guitar Info
Your guitar was made at the
Fuji-gen Plant (for Fender Japan), Japan
in the Year(s): 1995 - 1996
Fuji String Instrument Production Corpor...
Sorry, typo. I meant fitting the guitar with P90s. I know you cant buy one, or I'd have one! Hehehe =---
I have a 1996 Les Paul Classic Plus,and the original adjustable bridge is a problem...Now, for a guitar this nice and kinda expensive the adjustable saddle bridge is really junky!
It has alot of f...
Guest:
The first things you need to do if you are not going to take lessons are; besides getting a guitar, tuner, and metrodome are;
1. Determine what songs you want to learn. Guitar chords or tabs...
I'm not sure how these'd sound for guitar. Maybe for bass...
A transmission line speaker can be thought of as a twisted path for the rear wave that is usually tuned at 1/4 the wavelength...
Guest:
Have you tried swapping out the 2 cables between the guitar and the pedal and the pedal and the amp? Also, have you checked both cables to ensure that they are good and have conductivity betw...
...o build an amp eventually, and thought that making a tube pedal would be a nice intro. I have made my own guitar, speaker cabinets, and solid-state effects pedals, so why not make a tube pedal?
The...
... tone with minimal noise leakage
The ideal approach is to create a permanent setup of a double-layered guitar speaker isolation cabinet in another room, or a super-insulated closet in another room....
Hi Guest, here is your requested info.
Guitar Info
This guitar is from the Signature Series
made at the Corona Plant (Fender), USA
in the Year(s): 2003
Fender: Corona
Corona factory wa...
Hi Guest, Info as follows:
Guitar Info
Your guitar was made at the
Corona Plant (Fender), USA
in the Year(s): 1989 - 1990
Fender: Corona
Corona factory was opened in 1985, Corona Ca...
Dear Guest:
I can tell you that this guitar is American Made only. Fender's on-line dating database doesn't contain any E7XXXXX serial numbers that I could easily find. E-mail Jeff at <...
Hi Peter....SQ13200 relates to the following details
Guitar Info
Your guitar was made at the
Fuji-gen Plant (for Fender Japan), Japan
in the Year(s): 1985 - 1986
Fuji String Instrument ...
Hi Guest,
Guitar Info
This guitar is from the U.S. Vintage Series
made at the Corona Plant (Fender), USA
in the Year(s): Cannot be determined from serial number,
however you can consult th...
...ng that you are located in a cold place.... If so, my best guess would be dehydration of the wood in the guitar, assuming it's an acoustic and the wood is shrimking (fingerboard/fret region) as ...
The Content on this site is provided for general information purposes only. Your use of the Content, or any part thereof, is made solely at Your own risk and responsibility. By entering this site you declare you read and agreed to its
Terms, Rules & Privacy.
Copyright © 2006 - 2010 Axe Central