...nks for the kind words. Like I said the character of the pickups could use a little improvement, but the guitar definitely gets me from point A to point B.
Jeremy...
...their vast experience. I got a Vox Classic Rock Headphone Amp AP-CR. They didn't have the AC-30 at Guitar Center North Attleboro, MA. If I don't like it I'll swap it out for another ...
...a few things to check out ref your volume problem...You have done one of the things by trying a different guitar, you have now illiminated it being an amp problem and identifying that the guitar has a...
... I'm only using it for recording using a microphone - no pickup. I'm mostly recording acoustic guitar as a track(s) with electric guitar, keys, bass, etc., so I guess I'm striving for ...
...". I think the moral of that story is that the sound has much more to do with other factors in the guitar, and that the fingerboard material is only a minor contributor to the sound....
Hi Lidho, I have sent info to you via email and will repeat here.
Guitar Info
Your guitar was made at the
Fuji-gen Plant (for Fender Japan), Japan
in the Year(s): 1993 - 1994
Fuji Stri...
Hi JR, Here is info on your guitar.
Guitar Info
This guitar is from the U.S. Vintage Series
made at the Corona Plant (Fender), USA
in the Year(s): Cannot be determined from serial number,
how...
For long term assignments I do but for short term I just take my cheap guitar (MIM Stratocaster) and a headphone amp (Line6 pocket pod express or Vox AC-30) with me, and clothes of course. Otherwise, ...
I have a MIM Stratocaster myself (my knock around guitar) and the strings feed through the bottom up,across, and over the bridge.
There are adjusting screws for each string on the back of the bridg...
There is all kinds of info on the internet concerning the Memphis guitars. I know a person that has one (his knock around guitar) and swear by it and another guy has changed out pickups, machine head...
...w many 88/89 MIJ Strats were built with the Schaller Locking Tremolo bridge recessed into the face of the guitar? This is the sweetest little guitar I've played..Authentic MIJ with serial number...
...At first I just figured these were inexperienced players who didn't know anything about setting up a guitar and probably needed an action adjustment on their out of the box bass. I've played...
Can anyone put a date to this guitar.
Thanks
Bob
...able...Here is some info from the net in addition.
Depending on what style of music you play on your guitar, a matching radius could improve your ability to play “that” type of music. Let me ...
Dear Guest:
If you are going to start learning the guitar by yourself and want to buy a very easy guitar to play, I would recommend the below;
1. Fender American Standard Stratocaster or Telecaste...
... the frets and see if any of the frets are higher than the others. If one is you need a fret job on your guitar any any good luthier should be able to correct the problem.... Last problem could be t...
..., as the MIM strat has cheap (die-case) machines heads and kinda hard to tune. The 1997 MIM strat is the guitar I learned on so it's kinda special to me, that's why I'm investing the e...
I could never hear a consistent difference, whether on a bass or a guitar.
I favor the maple fingerboards most of the time. The reason? I haven't measured them to verify my opinion, but the ma...
...trat style neck I'm putting on a strat copy for myself. I can just tell this is going to be one nice guitar. I have used allparts necks before not a bad neck but first choice would be warmoth.
...
...trat-type body scoop which gives it smoother lines. This one has passive EMGs. I usually don't buy a guitar without playing it, but I did alot of research on the Foto Telecasters and they are con...
Hi
My guitar strings rattle - its quite annoying (it might just be that they hit against the fret) but I was wondering if there is anything I can do about it?
... the note de-tuned as the note decayed. Pretty much dead. However, through my tube amp, the tone of this guitar still sounded pretty good. Well, after I got out my screwdriver and adjusted the pick...
I have a USA made 71 fender strat can you tell me the value of the guitar?
Hi TX, The one place where you will find the perfect buyer is the local guitar shop...some stores will post these items on their "For Sale" boards whilst others have a no policy also the ...
...uot; and click on Advanced search on the right, then in the first space type Kay and the third space type guitar The 1st says related to|: and the 3rd related to any etc. there you will find dozens o...
Hi Guest, Here are some details about your Ax in the event you don't know the info:
Guitar Info
Your guitar was made at the
Corona Plant (Fender), USA
in the Year(s): 1998 - 1999
Fe...
Hi Guest, Here are the details ref your ax:
Guitar Info
Your guitar was made at the
Fullerton Plant (Fender - Pre CBS Era), USA
in the Year(s): 1960 - 1961
Fender: Fullerton
The Full...
Dear Guest:
Sorry to hear of your brothers passing.... Based up the Fender database this guitar is an "American Standard" and could be anywhere from a 1982 to a 1999.... I would recommend...
Nice looking guitar there.
Did you finish it yet?
...our way to the front of the crowd - and there was this blond-haired kid sitting down with a custom-made guitar face up in his lap - in front of the "Twelfth Fret" booth - just freakin` wa...
The Content on this site is provided for general information purposes only. Your use of the Content, or any part thereof, is made solely at Your own risk and responsibility. By entering this site you declare you read and agreed to its
Terms, Rules & Privacy.
Copyright © 2006 - 2010 Axe Central