effects  
I have a tube pre-amp and tube power amp, neither of which has an effects loop.
I'd like to use a parallel effects loop between the preamp and amp, so that I can control the wet/dry signal from...
I know multi-effects pedals aren't everyone's bag, baby- but for users of the Korg AX1500G pedal, there is a Yahoo Group dedicated to discussing this versatile pedal. Go to http://groups.y...
...us CH-1
Flanger BF-3
Digital Delay DD-6
Metal Zone - MT-2
TU-2 Tuner
Ernie Ball Volume Pedal
Which effects should I run through the FX loop, and which should I run direct to the amp?
Should I...
Generally speaking, you CANNOT simply put effects between the amp and the speaker. The signal levels are entirely different from an effects loop arrangement.
With your hotplate, you can run the li...
...put a distortion effect in a patch and then clean on another is there a short time delay in changing the effects?? I`m just wonder because to get the Boss Overdrive/Distortion Pedal I could get an ...
...into a PC sound card (with a 1/4 to 1/8 adapter)? Can I plug it into the digital recorder?
Is the "effects send" jack line level? Can that be plugged into a PC sound card (with a 1/4 to 1...
... GT-6 and am in the process of trying to create my own patches.
I'm having trouble trying to add effects from the same group. For example, I'm trying to add a phaser from FX-2 which al...
any special effects of Korg ax1500g like steve vai & satriani set up?
It's not really in the rock realm, but if you get a chance to check it out, it will sweep you up. Touch by John Klemmer (the whole album)
is there any info on the kent les paul effects model
guitars
...ce these. Tuner, Big Muff Pi, Chorus & BBE Sonic Stomp. More importantly, should I put the BBE in the effects loop and keep the distortion and chorus on the guitar line? It's been bothering...
can I use the reverb send and returns as an effects loop on a 65 super reverb re issue?
ok i'm no guitar superstar, got given a boss me8 effects unit, downloaded the manual but still having a few dramas trying to get the best out of it.
any help would be appreciated.
thanks fellas
Can you acess the effects only on the gt6?
I have recently bought an AW-3 Dynamic Wah pedal and im very pleased with it but it eats batteries! I am making a power supply for it but the only thing i dont know is what type of connector the ped...
...is:
One neat trick you can do that doesn't alter the amp at all is to use the reverb driver as the effects send signal, and return the effects output to the reverb return jacks. Set the effect...
Here is an article I found while surffing the web concerning proper placement of your effects pedals. I hope ya'll enjoy it and it assists ya'll in getting your effects pedals in order......
Ha! I didn't even think of this thread as being OT, but it is... Still
- to me, effects and amps are one. Fender, Roland, Yamaha, and others took it a step further and physcially made them one. ...
Alright, I'm sorta naive about effects and all, so I didn't realize this thing won't work in the effects loop. Thing is, my new ME-50 works fine in the effects loop, and I use the Boss ...
...t preamp with modeling amps, the GT-6 is the best choice. If you´re looking for a modeling amp with great effects, the Pod is a great choice. With another words, I do think the GT-6 is the most flexi...
No bypass button. But you can program a patch without any effects. Or use the tuner which can be used as a bypass.
Yes you can switch off the preamp modelling and just have one or several of the ot...
Having aquired a few effects pedals over the last few months I thought I might have a go at building a pedal board. I`ve only ever really used my pedals in isolation so arrangement is something new ...
Dear Guest:
It depends upon what kind of amp you have and what effects it has....
I have a Boss Reverb, Boss Chorus, Metal Muff Distortion, Jimi Hendrix Wah, Boss Acoustic, Boss Equalizer, Boss Di...
Where would you place a compressor in tyhe effects chain? Before or after distortion/overdrive boxes? Why?
...as kind of similar to a Fender Twin Reverb - I don't remember now what model it was. I got a Digitech effects unit and used to have a lot of fun screwing around with effects and an acoustic guita...
The Content on this site is provided for general information purposes only. Your use of the Content, or any part thereof, is made solely at Your own risk and responsibility. By entering this site you declare you read and agreed to its Terms, Rules & Privacy.
Copyright © 2006 - 2010 Axe Central |
TIP: Write your question in details [ why? ]
Sponsored LinksLatest Posts
|
more posts...