Building a Bass pedal board - Pedal Order?

Having aquired a few effects pedals over the last few months I thought I might have a go at building a pedal board. I`ve only ever really used my pedals in isolation so arrangement is something new to me. Other than experimenting myself, can anybody offer any decent advice regarding order for the following pedals:
Boss Octaver OC-2 Boss Chromatic Tuner TU-2 Boss Digital Delay DD-3 Boss Bass Equalizer GE-7B Russian Big Muff Pi ProCo Turbo Rat
Thanks for any help in advance, oh and to complicate things a little more, i`d love to get hold of a EHX Bass Micro Synthesizer in the future, so where would this best sit in the effects chain if I get one?

Bass - tuner - EQ - Big Muff - Rat - Octaver - Micro Synth - Delay - amp

above, and then after the distortion. It makes a big difference, so see which is more useful to you. Also, if you want to use the distortion along with the octave divider, you might want to put the octave box first in the chain. They tend to work best with the purest signal possible; the harmonics added by the distortion pedal could cause mistracking in the octave effect.

before and after the distortion.
I also do not know anything about octaver pedals, so where i put it was basically a guess. I guess you do learn somethign every day

I`ll try the EQ before and after the distortion and see what suits my sound. I`ll also try the octaver at the start of the chain (after tuner) and at the end(before digital delay). To be honest, if and when I get hold of a micro synthesizer, it will probably replace the octaver, but i`ll experiment more when I actually have one.
From the advice given I think that gives me about 4 possible combinations to experiment with, presuming that I begin with the tuner, and end with the digital delay, and have the two distortion pedals somewhere in the middle.
I`m currently waiting on a power cable to power the boss pedals from the tuner, so once this arrives i`ll get experimenting!