| Blogs | Forums | Photo Album |
bridge
I bought a used Les Paul Studio. I'm not sure if the Tune-O-Matic bridge is installed correctly, I saw pictures of Les Pauls having in mounted the other way round. The string height is what I lik...
Has anyone done the A/B comparison between the Leo Quan Bad Ass II bridge and a traditional Fender Vintage style? Does $60 sound like a good price for a Bad Ass II?
I am considering a American Sta...
hi, I'd like to add a toggle switch to my Strat which activates the bridge pickup in switch positions 4 & 5 so I can get 'middle/neck +bridge' & 'neck + bridge'...
... grab some of ya'll experience and vast knowledge on guitars. Fender tells me that they do not make bridge covers for modern Telecasters and do not know of anyone that does. Do any of ya'l...
I have a 1996 Les Paul Classic Plus,and the original adjustable bridge is a problem...Now, for a guitar this nice and kinda expensive the adjustable saddle bridge is really junky!
It has alot of f...
I was wondering if anyone can tell me how you fit a tremolo bridge to a Les Paul. I have seen it on guitars but am wondering how you do it. The guitar I would be fitting it to would be one with no pr...
...t; position where
I can use the center position on my pickup selector to activate both the neck and the bridge pickup.
I looked on guitarnuts.com but could not find anything.
Has anybody done th...
Man, the only way I'd buy a bridge ashtray is with the old rubber.
...ers do it like Eric Johnson and Walter Trout. It leaves the middle wide open and thats far better than de bridge without tone control.Another option if you don't want to solder is just swap the r...
I believe that maybe they stopped making the bridge cover as it really doesn't fullfil any useful function other than covering the bridge. I just want to dress my Tele up a little to make it loo...
Just got a 1998 Fender Jazz with a Badass II bridge. Can anyone direct me to an internet site or two where I can learn how to *properly* set up a bass guitar: bridge, neck, string height. I want quite...
...a dummy!). The guitar seems to be authentic but there is something that makes me think it is a fake - The bridge hardware seems to be screwed directly into the body and not into a threaded gromet-type...
Put in a mini toggle to kick in the bridge pickup. You can add neck & Bridge or all three. I have done a couple like that, then you have 7 settings.
...on issues.
Without a mod, it seems to me, the 12th fret would no longer be at the midpoint between the bridge and nut. And it would be off by way more than the standard bridge could compensate.
...
Here is the one I use 1-volume 1- tone 1 -Mini switch kicks in the bridge pickup at any time (Neck and bridge and all three ) It is on Seymour Duncan's web sight.easy to wire. http://www.seymou...
Hi
My Les Paul Special is fitted with p90s from the factory. Problem is that the pickup on the bridge is a not quieter than the pickup on the neck. From the neck I get A nice rich bass sound, and fro...
.... It was on Ebay as a blem in the finish. I can`t really find anything I would cal a blem. It needed the bridge tuned. Other than that it was set up very well. The nut height was good, the frets l...
...K, do not have a "coil tap" switch that lets you choose between one coil or both coils on the bridge pickup. Speaking ONLY for myself, I would never own a solidbody that didn`t have a sin...
... (non-SD logo on bobbins) set of the Duncan '59's in my Hamer. I swapped out an older Duncan JB bridge p/u in favor of the '59 bridge about 6 months ago and I like the '59 better (...
Hi,
I have began making a guitar and am up to routing
the cavities in the body. I have my tremolo bridge, springs etc.. and pickups but I fear that my body may be too thin. Can I trim some of the t...
...atocaster (was never used..verified through the music shop) and it has the Fender Atomic Humbucker in the bridge position. My question is will this fit right into my Mexican Strat? In other words, is ...
...dy would be held rigid by bracing, like an acoustic guitar.
Some guitars have a block only under the bridge, in order to support it better. These guitars could probably be marketed as either sem...
...a good substitute for the sh1tty Jazz IBZ USA made by dimarzio piece of Pizza pie it currently has in the bridge. Based ONLY on my opinion of the quarter pounder, I'd get a bridge quarter pounder...
... Alder body flamed maple top, Sperzel locking tuners, and a Seymour Duncan 59 in the neck, and JB in the bridge, plus a Piezo bridge pickup. Seems like a pretty versatile instrument. The reason I�...
Ive put a SD Custom Custom in my PRS CU22 (bridge) and really dont like it.. was looking for a slightly hotter output for a grittier gain sound than the dragon II, which it has, but its pretty treble ...
The Content on this site is provided for general information purposes only. It can not and should not be a substitute for face-to-face professional advice. By entering this site you declare you read and agreed to its Terms, Rules & Privacy.
Copyright © 2006 - 2009 Axe Central |
Sponsored LinksLatest Posts
|
more posts...